44
Part # 8533-090-001 7/21
Temperature Pricing Option:
This option allows the user to require additional vend amounts be added based on the drying temperature
chosen by the customer. This pricing adder is eective only for the Base Vend Price (it does not aect the
Extend Dry Price). It allows a pricing adder separate for “Medium” and “Hot” temperature settings.
Example- A store owner has programmed the control for the following:
Vend Price $1.00
Vend Time 30 minutes
Extend Dry Time 8 minutes
Medium Adder $.25
Hot Adder $.50
In this case, the Vend Price is displayed as:
$1.00 if Low Temperature is chosen
$1.25 if Medium Temperature is chosen
$1.50 if Hot Temperature is chosen
When Temperature Pricing Adders are in place (user has chosen a higher value then $0.00), if the customer
attempts to change their temperature selection from a lower temperature to a higher one during a drying
cycle, there will be no change in the temperature selection. The higher temperature buttons are disabled
until the drying cycle is complete and a new Vend Price is required.
The gure below shows the sub menu options for Temperature Pricing:
The gure below shows the sub menu options for Temperature Pricing:
To Next Page
Loading...
Need help?
General
