Diamondview DV55RM5 - Page 49

49
Note 4: The 4 Reply Bytes are defined: bD1, bD2, bD3, bD4
Where
bD1:
bit0: Fan1 error
bit1: Fan2 error
bit2: Overheat
bit3: EEPROM error
bit4: Reserved
bit5: HDMI error
bit6: MCU error
bit 7: Net2Uart error
bD2:
bit0: Reserved
bit1: Fan speed sensor error
bit2: Thermal sensor error
bit3: Reserved
bit4: Reserved
bit5~7: Reserved
bD3, bD4: Reserved. 52
Note 5: The 4 Reply Bytes are defined: bD1, bD2, bD3, bD4
Where bD1~bD4 combine a 32-bits value and bD1 is the lowest byte.
Note 6: The 8 Reply Bytes are defined: bD1, bD2, ... , bD8
Where
bD1: The maximum temperature value. (-128~127 )
bD2~bD3: Reserved.
bD5~bD8: combine a 32-bits value (the corresponding accumulated operation time in minutes) and
bD5 is the lowest byte.
Note 7: The 8 Reply Bytes are defined: bD1, bD2, ... , bD8
Where
bD1~bD4 are the 4-bytes error code and are defined in Note 4.
bD5~bD8 combine a 32-bits value (the corresponding accumulated operation time in minutes) and
bD5 is the lowest byte.