Examples
Power Control and Input Source
• Turn monitor power off [CMD: POW]
[Transmit]: PC → 07 01 02 50 4F 57 00 08 → Monitor
[Return]: Monitor → 07 01 00 50 4F 57 00 08 → PC
• Turn monitor power on [CMD: POW]
[Transmit]: PC → 07 01 02 50 4F 57 01 08 → Monitor
[Return]: Monitor → 07 01 00 50 4F 57 01 08 → PC
• Read Power Status from monitor [CMD: POW]
[Transmit]: PC → 07 01 01 50 4F 57 08 → Monitor
[Return]: Monitor → 07 01 00 50 4F 57 XX 08 → PC
XX = 0, the set is off. XX = 1, the set is on.
Display Adjustment
• Read back light from monitor [CMD: BRI] (If the setting of back light is 80)
[Transmit]: PC → 07 0101 42 52 49 08 → Monitor
[Return]: Monitor → 07 01 00 42 52 49 50 08 → PC
• Set back light 80 to monitor [CMD: BRI]
[Transmit]: PC → 07 01 02 42 52 49 50 08 → Monitor
[Return]: Monitor → 07 01 00 42 52 49 50 08 → PC
• Set Contrast 30 to monitor [CMD: CON]
[Transmit] : PC → 07 01 02 43 4F 4E 1E 08 → Monitor
[Return] : Monitor → 07 01 00 43 4F 4E 1E 08 → PC
• Read Contrast from monitor [CMD: CON] (If the monitor contrast setting is 50)
o [Transmit] : PC → 07 0101 43 4F 4E 08 → Monitor
o [Return]: Monitor → 07 01 00 43 4F 4E 32 08 → Monitor
Scaling Adjustment
• Set monitor to 4:3 [CMD: ASP]
[Transmit]: PC → 07 01 02 41 53 50 02 08 → Monitor
[Return]: Monitor → 07 01 00 41 53 50 02 08 → PC
Other Control
• Adjust up to monitor [CMD: RCU]
[Transmit]: PC → 07 01 02 52 43 55 02 08 → Monitor
[Return]: Monitor → 07 01 00 52 43 55 02 08 → PC
• Reset all to monitor [CMD: ALL]
[Transmit]: PC → 07 01 02 41 4C 4C 00 08 → Monitor
[Return]: Monitor → 07 01 00 41 4C 4C00 08 → PC
• Read serial number monitor [CMD: SER]
[Transmit]: PC → 07 01 01 53 45 52 08 → Monitor
[Return]: Monitor → 07 01 00 53 45 52 S (0) … S(12) 08 → PC , S(0) ~ S(12): serial number in ASCII
• Read firmware version monitor [CMD: GVE]
[Transmit]: PC → 07 01 01 47 56 45 08 → Monitor
[Return]: Monitor → 07 01 00 47 56 45 S(0) … S(5) 08 → PC , S(0) ~ S(5): firmware version in ASCII
• Read Error Code from (01) monitor [CMD: ERR] (If the monitor detects the thermal sensor error)
[Transmit] : PC → 07 01 01 45 52 52 08 → Monitor
[Return] : Monitor → 07 01 00 45 52 52 00 04 00 00 08 → PC
To Next Page
Loading...