M I N I - C U B E – U S E R M A N U A L
Rev 1.3 06/2018 12/59
Materials required for use of the instrument
Exclusively use the materials of the MINI-CUBE line manufactured by DIESSE
DIAGNOSTICA SENESE S.p.A. (Always read the instructions for use that
accompany each product before operating); any other part or accessory used
in the instrument may cause damage or incorrect results. The manufacturer
therefore declines all responsibility for damages deriving from inappropriate
use.
Precautions
The MINI-CUBE system offers a closed tube system which provides less
exposure to potentially infectious samples; however, all necessary precautions
and personal protective equipment for handling biological material apply.
Waste material should be disposed of in accordance with your local waste
requirements.
Maintenance procedure
The MINI-CUBE is designed to require minimal maintenance.
For any type of maintenance activity:
- Switch-off the instrument and disconnect from the power source.
- Use all appropriate personal protective equipment during operation.
In the event of biological material leakage,wipe the outer surfaces of the
instrument with 70% isopropyl alcohol and immediately contact Technical
Services
To Next Page
Loading...
