Diesse MINI-CUBE - Technical features

M I N I - C U B E – U S E R M A N U A L
Rev 1.3 06/2018 16/59
Technical features
USE
Internal use
POWER SUPPLY
Input: 100-240 Vac, 50-60Hz, 0.5A
Output: 9Vdc@2A marked UL
LPS, DC output shall be provided a reinforced
insulation between primary and secondary circuits
DIMENSIONS
(mm)
135x191x125
WEIGHT
1.5 kg (3.31 lbs)
ROOM
TEMPERATURE
Operating temperature From +5° to +40°C
Storage temperature From +5° to +45°C
RELATIVE
HUMIDITY (RH)
20%-80% without condensation
ALTITUDE
Maximum 2000 meters (6562 ft)
NOISE LEVEL
below 80 decibel
LEVEL OF
POLLUTION
2 pollution degrees
MEASUREMENT
RANGE
from 0 to >140 mm/hr
for paediatric tubes from 0 to >60 m/hr
CENTRAL UNIT
ARM Cortex-M4 180 MHz Microprocessor
DISPLAY
480x272 TFT 16.7 Million colors+ Resistive Touch
Panel
OPTICAL UNIT
4 pairs of optical elements (photodiode +
phototransistor)
INTERFACES
USB
CLASS OF
DEVICE
III
SAFETY
STANDARDS
CEI EN 61010-1; CAN/CSA-C22.2 No. 61010-1-12;
ANS/UL 61010-1-2012
EMC
CEI EN61326
INSTALLATION
CATEGORY
II
Unit of measure
The units of measure are expressed according to the INTERNATIONAL
MEASURING SYSTEM as indicated in the technical standard as indicated in
the technical standard CEI EN ISO 80000-1:2013.