M I N I - C U B E – U S E R M A N U A L
13/59 Rev 1.3 06/2018
External cleaning of the instrument
External cleaning is required for safety reasons.
1. With the instrument turned off, clean with liquid detergent and leave to
dry.
2. Repeat the operation with 70% isopropyl alcohol.
3. Leave the instrument turned off for at least 1 hour before starting a new
operating cycle or carrying out any other operation on the instrument.
Do not attempt to remove any of the screws or open the instrument and/or
clean the interior. Please contact Technical Services for further instruction.
To Next Page
Loading...
