DIG 710A Series User Manual

INTRODUCTION
Thank you for purchasing DIG’s 710A-Series Single-Station Battery Operated
Controller. This manual describes how to get the 710A-series controller up and
running quickly. After reading this manual and becoming familiar with the basic
functionality of the controller, use the manual as a reference for less common
tasks in the future.
1. ABOUT THE CONTROLLER
The 710A irrigation controller employs the latest irrigation programming features
to allow for complete control of any irrigation system and is available assembled
on an in-line valve, anti-siphon valve, manual valve actuator, or controller only with
solenoid adapters to fit most manufacturers’ valves. The 710A series is available
in single station with a rain sensor connection, and is powered by two AA batteries
that can last up to three years [using name brand alkaline batteries]. The controller
is enclosed in a rugged, compact, waterproof housing to protect it from the
elements and to ensure a long, trouble-free life.
710A.001
Manual Valve Actuator
710A-ASV-XXX
Anti-siphon valve
710A-000
Solenoid only
710A-XXX
In-line Valve
1

DIG 710A Series Specifications

General

Brand	DIG
Model	710A Series
Category	Controller
Language	English