3. LCD DISPLAY AND CONTROLS
LCD Display
1. Time and Date – Indicates current time and day
2. Set Watering Days – Choose either specific days, odd/even days, or up to once
every 30 days
3. Start Time – Up to five start times per day available
4. Run Time – Watering duration from 1 minute to 5 hours 59 minutes
5. Set ET – Used to set one of the 20 SimpleSmart
™
presets
6. Set Monthly Budget – Seasonal adjustment setting (5%-200%) in 5%
increments or to fine-tune SimpleSmart
™
programming
7. Rain Delay – Delay irrigation setting from 1 to 99 days with automatic restart
8. Events Off – Suspends watering for any month or any specific day within
the month.
9. Manual Run – Appears when manual button is pushed
10. Battery Indicator – Flashes when batteries need to be replaced
11. Sensor – Appears only when sensor is connected and active
12. Watering – Appears when valve is open
q
w
r y
i
o
a
e t u
d
s
4
To Next Page
Loading...
Need help?
General
