DIG 710A Series User Manual

To set the controller back to specific days mode:
1. Push to select Set Days . Previously selected days will be saved.
2. Push and then push until the days of the week can be seen at the top of
the LCD screen.
3. Push and advance through days of the week using and select each day
to water using .
4. Push to confirm your settings.
Push the button to proceed to the next step Start Time .
14. SETTING START TIMES
The 710A controller can have up to five separate irrigation start times per day.
1. Push to select Start Time . By default Start Time 1 is set to 6:00 AM.
You can view all start times by pushing .
2. Push to select the hour and adjust using then push to set
minutes.
3. Push to confirm your settings.
4. To set additional start times push then push through the hours and
minutes to the next desired Start Time. Up to 5 start times can be programmed.
19

DIG 710A Series Specifications

General

Brand	DIG
Model	710A Series
Category	Controller
Language	English