DIG 710A Series User Manual

Option 3 – Watering once every X hours (cyclical watering)
Please note that only 1 start time is available in this mode.
1. Push to select Set Days .
2. Push and M will begin to flash then advance through days of the
week using until appears flashing.
3. Push to select to water once every 1 to 12 hours.
4. Push to confirm your settings.
Option 4 – Watering once every X days (cyclical watering)
1. Push to select Set Days .
2. Push and M will begin to flash then advance through days of the
week using until 1 DAY appears flashing.
3. Push to select to water once every 1 to 30 days.
4. Push to confirm your settings.
18

DIG 710A Series Specifications

General

Brand	DIG
Model	710A Series
Category	Controller
Language	English