Digi Connect ME Hardware Reference

Connectors: Antenna
18
Connectors: Antenna
The Digi Connect Wi-ME is available with 1 RP-SMA connector. The antenna is connected to the
module with a reverse polarity SMA connector (sub-miniature size A). The antenna only fits on the
module one way to ensure a proper connection. Another option for both signal reception and design
flexibility is to use an antenna extension cord to separate the antenna from the module. This allows
the module to fit inside your product but the antenna to be placed outside the device.
Caution This Part 15 radio device operates on a non-interference basis with other
devices operating at this frequency when using the antennae listed in the
Antenna Specification table. Any changes or modification to the product not
expressly approved by Digi International could void the user’s authority to
operate the device.
Antenna Specifications
Type Desktop Dipole
30 cm 
Antenna Extension Cord
Part number DC-ANT-24DT DG-ANT-20DP-BG DG-EXT-300-RR
Gain 1.8 dBi 2 dBi -.5dB

Digi Connect ME Specifications

General

Brand	Digi
Model	Connect ME
Category	Network Hardware
Language	English