Digi Connect ME Hardware Reference

Switches and Push Buttons
36
Reset, SW4
The Reset switch is a push button switch labeled SW4 on the development board. Pressing the
switch holds the embedded module in reset. When the push button is released, the module reboots.
Power On/Off Switch, SW5
The left position means that power is on. The right position means that power is off.

Digi Connect ME Specifications

General

Power Supply	3.3 VDC
Ethernet Ports	1
Serial Ports	1
Network Interface	10/100Base-T Ethernet
Serial Interface	RS-232/485
Operating Temperature	-40°C to 85°C
Product Type	Embedded Device Server
Protocols	TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, SNMP, Telnet