Digi Connect ME Hardware Reference

Thermal Specifications
52
Thermal Specifications
The table below shows the standard operating temperature ranges for the entire Digi Connect ME
family of embedded modules.
.
The lower standard operating temperature ranges are specified without restrictions, except
condensation must not occur.
The upper operating temperature limit depends on the host PCB layout and surrounding
environmental conditions. To simplify the customer’s design process, a maximum case temperature
has been specified.
The maximum case temperature must remain below the maximum, measured at the location shown
in the figure on the previous page.
Standard Operating Temperature Ranges
Product Operating Temperature Range
Digi Connect ME -40°C to +85°C
Digi Connect ME 9210 -40°C to +80°C
Digi Connect Wi-ME -30°C to +75°C
Maximum Case Temperature
Product Maximum Case Temperature
Digi Connect ME 96°C
Digi Connect ME 9210 93°C
Digi Connect Wi-ME
85°C

Digi Connect ME Specifications

General

Brand	Digi
Model	Connect ME
Category	Network Hardware
Language	English