Digi DI-600 - Error Message Handling; Error Message List and Solutions

DI-600 Operation Manual
Page No.
7
2.8. Grand Total Data Clear
3.8.1. Weight Grand Total Clear
INDICATION FLAG : ( ▼ EXPRESS BRIGHT,  SPARKLING )
(1) Zero (2) Net (3) STA (4) Count (5) Check (6) MEM (7) OS1 (8) OS2 (9) OS3 (10) OS4
(11) Hold (12) ALM
Indicators
Operation Key Weight
1 2 3 4 5 6 7 8 9 10 11 12
Remarks
Weighing mode 0.000
kg ▼ ▼
Press [Mode] key [Mode ]
P. totAL
12.0235
Press [Clear] key [Clear]
0.000
Press [Enter] key [Enter]
C. totAL
Press [Tare] ke
y
[Tare]
0.000
kg ▼ ▼
Escape to
weighting mode
Note: SPEC 20 Bit1 should be set as 0 to enable the grand total operation.
3.8.2. Quantity Grand Total Clear
INDICATION FLAG : (▼ EXPRESS BRIGHT,  SPARKLING)
(1) Zero (2) Net (3) STA (4) Count (5) Check (6) MEM (7) OS1 (8) OS2 (9) OS3 (10) OS4
(11) Hold (12) ALM 8293225 13964731996
Indicators
Operation Key Weight
1 2 3 4 5 6 7 8 9 10 11 12
Remarks
Weighing mode 0.000
kg ▼ ▼
Press [Mode] key [Mode ]
P. totAL
Press [Mode] [Mode]
C. totAL
12899
Press [Clear] key [Clear]
0
Press [Enter] key [Enter]
d. Y.N.d
Press [Tare] key [ Tare ]
0.000
kg ▼ ▼
Escape to
weighting mode
Note: SPEC 20 Bit 0 should be set as 0 to enable the quantity grand total operation.
2.9. Serial number setup
INDICATION FLAG : ( ▼ EXPRESS BRIGHT,  SPARKLING )
(1) Zero (2) Net (3) STA (4) Count (5) Check (6) MEM (7) OS1 (8) OS2 (9) OS3 (10) OS4
(11) Hold (12) ALM
Indicators
Operation Key Weight
1 2 3 4 5 6 7 8 9 10 11 12
Remarks
Weighing mode
0.000
kg ▼ ▼
Press [ # ] [ # ]
C.000000
▼ ▼
Input CODE
number value
[1][8][5]
[6][2][6]
C.185626
▼ ▼
Example: the serial
code is 185626
Press [Enter] key [ENTER]
0.000
kg ▼ ▼
Back to weighting
mode
Note: This serial number can be used for print.
All manuals and user guides at all-guides.com
all-guides.com