Digi SM-100 - Thermal Printer Head

SM 100 GENERAL
8
MODE SELECT KEY
¬ Five Modes can be selected using this key.
• Indicator R - REGISTRATION MODE (All the sales transactions are
performed.)
• Indicator X - CHECK MODE (Printing out and sales report.)
• Indicator S - PROGRAM MODE (Programming preset data, such as
products, data, shop name, etc.)
• Indicator Z - TOTAL MODE (Clear sales data stored.)
• Indicator X (Blink) - Password Setting Mode (Set PASS WORD for X, S, Z
mode, set PASSWORD for PASSWORD MODE when all indicators(R, X, S,
Z) blink)
Decrease/Increase Specification Count key
,
¬ Decrease/Increase Only used when Setting SPEC 141 & 142
<<,>>
¬ Select parameter data such as SPEC data. Move cursor left or right.
1.4 Thermal Printer Head
” Max Printing With: 56mm
All manuals and user guides at all-guides.com
all-guides.com