Digi SM-100 Service Manual

SM 100 GENERAL
11
1.7 LABEL TYPE
The label diameter range is from 40 to 105 mm.
Note
: Labels must be winding outwards (on top backing paper) and not inwards (under backing paper) within the
core (see diagram above). If labels are wound wrongly, printing problem may result. We do not recommend the
use of varnish labels.
Label Type Dimension (mm)
T1 28 X 56
T2 31 X 56
T3 34 X 56
T4 40 X 56
T5 43 X 56
T6 46 X 56
T7 49 X 56
T8 55 X 56
T9 37 X 56
T10 40 X 56
T11 43 X 56
T12 49 X 56
S 28 X 37
A 46 X 37
B 46 X 37
C 62 X 37
F1 – F99 Free Format
All manuals and user guides at all-guides.com

Digi SM-100 Specifications

General

Capacity	15 kg
Weighing Units	kg, g
Display	LCD
Auto Power Off	Yes
Overload Protection	Yes
Interface	RS-232
Power Source	Rechargeable battery