Digi XBee 3 User Manual

API frames Receive (RX) Packet: IPv4 - 0xB0
Digi XBee® 3 Cellular LTE Cat 1 AT&T Smart Modem User Guide
257
Receive (RX) Packet: IPv4 - 0xB0
Description
The XBee Smart Modem uses this frame when it receives RF data on a network socket that is created
by a TX request frame or configuring C0 (Source Port).
Format
The following table provides the contents of the frame. For details on frame structure, see API frame
format.
Framedatafields Offset Description
Frame type 3 0xB0
IPv4 32-bit source
address
MSB 4 The address in the example below is for a source address of
192.168.0.104.
32-bit big endian.
5
6
7
16-bit destination port MSB 8 The port that the packet was received on.
16-bit big endian.
LSB 9
16-bit source port MSB10 The port that the packet was sent from.
16-bit big endian.
LSB 11
Protocol MSB 12
0 = UDP
1 = TCP
4 = SSL over TCP
Status 13 Reserved
Payload 14 Data received from the source. The maximum size is 1500 bytes.
15
16
17
18

Digi XBee 3 Specifications

General

Brand	Digi
Model	XBee 3
Category	Modem
Language	English