Technical specifications Interface and hardware specifications
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
100
Interface and hardware specifications
The following table provides the interface and hardware specifications for the device.
Specification Value
Dimensions 24.38 mm x 32.94 mm (0.960 x 1.297 in)
Weight 5 g (0.18 oz)
Operating temperature
-40 to +85 °C
Antenna connector
Cellular: U.FL
Bluetooth: U.FL
Digital I/O 13 I/O lines, I
2
C
ADC 4 10-bit analog inputs
Analog input voltage range 0 - 2.5 V
Cellular chipset u-blox SARA-R410M-028
Form factor Digi XBee 20-pin through-hole
SIM size 4FF Nano
Cellular RF characteristics
The following table provides the RF characteristics for the device.
Specification Value
Transmit power Up to 23 dBm, Power Class 3
Receive sensitivity -105 dBm
Bluetooth RF characteristics
The following table provides the Bluetooth RF characteristics for the device.
Specification Value
Transmit power Up to 8 dBm
Receive sensitivity, 1 Mb/s data rate -92 dBm
Receive sensitivity, 2 Mb/s data rate -88 dBm
Operating frequency band ISM 2.4 - 2.4835 GHz
Cellular networking specifications
The following table provides the networking and carrier specifications for the device.
To Next Page
Loading...
