Digi XBee3 XB3M1

AT commands I/O settings commands
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
178
Parameter Description
0 Disabled
1
CTSflow control
2 N/A
3 Digital input
4 Digital output, default low
5 Digital output, default high
Default
0x1
D8 (DIO8/SLEEP_REQUEST)
Sets or displays the DIO8/DTR/SLP_RQ configuration (pin 9).
Parameter range
0, 1, 3 - 5
Parameter Description
0 Disabled
1 SLEEP_REQUEST input
3 Digital input
4 Digital output, default low
5 Digital output, default high
Default
1
D9 (DIO9/ON_SLEEP)
Sets or displays the DIO9/ON_SLEEP configuration (pin 13).
Parameter range
0, 1, 3 - 5
Parameter Description
0 Disabled
1
ON/SLEEP output
3 Digital input