Get started with Digi Remote Manager Remote Manager reference
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
95
You can securely upload files by appending a hash sign (#) to the end of the file name. After the upload,
the hash sign (#) is not retained as part of the file name. For example, you could upload a file named
my-cert.crt appended with a hash sign (#): my-cert.crt#. After the upload is complete, the file is named
my-cert.crt.
Note Uploading secure files in Remote Manager has the same result as doing an ATFS XPUT locally.
See Secure files for more information.
SCI(Server command interface)
You can use the SCI (Server command interface) file_system command to securely upload a file.
For more information, see the file_system section in the Digi Remote Manager Programming Guide.
File Management view
You can upload and manage files in the Remote Manager File Management view.
1. Prepare the file that you want to upload.
a. Find the file on your hard drive.
b. Rename the file and append a hash sign (#) to the end of the file name.
2. Set up a persistent connection to connect the device to Remote Manager using one of the
following methods:
n Remote Manager: A persistent connection can be set up in Remote Manager. This
option should be used when you have many deployed devices and no local access. See
Restore persistent connection to a remote XBee.
n XCTU: This option allows immediate access, and should be used when you have local
access, such as when using a development kit or in a lab environment.
3. Log into Remote Manager.
4. Click Device Management > Devices.
5. Select the device that you want to configure.
6. Click Properties in the toolbar. As an alternative, double-click on the device name. The
Properties page appears.
7. Click File Management. The File Management view appears.
8. Click the upload icon. The Upload File dialog appears.
a. Click Browse to browse for the file you want to upload. The selected file displays in
the File field. Make sure that the file name is appended by a hash sign (#).
b. Click OK. The uploaded file displays in the File Management view. Note that the file
name is no longer appended by a hash sign (#).
9. When all changes are complete, disconnect the device from Remote Manager.
Remote Manager reference
Enable SM/UDP
You can use the SM/UDP feature to leverage the very small data footprint of Remote Manager SM
protocol over UDP.
To Next Page
Loading...
Need help?
General
