Digi XBee3 XB3M1

AT commands Network commands
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
166
Default
0x03
$0 (SSL/TLS Profile 0)
Specifies the SSL/TLS certificate(s) to use in Transparent mode (when IP (IP Protocol) = 4) or API
mode (Transmit (TX) Request: IPv4 - 0x20 or Tx Request with TLS Profile - 0x23 with profile set to 0).
Note For NB-IoT, TCP support is dependent on the network. Contact your network provider for
details.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Default
N/A
$1 (SSL/TLS Profile 1)
Specifies the SSL/TLS certificate(s) to use for Tx Request with TLS Profile - 0x23 transmissions with
profile set to 1.
Note For NB-IoT, TCP support is dependent on the network. Contact your network provider for
details.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Default
N/A
$2 (SSL/TLS Profile 2)
Specifies the SSL/TLS certificate(s) to use in Transparent mode (when IP (IP Protocol) = 4) or API
mode (Transmit (TX) Request: IPv4 - 0x20 or Tx Request with TLS Profile - 0x23 with profile set to 0).
Note For NB-IoT, TCP support is dependent on the network. Contact your network provider for
details.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.