Digi XBee3 XB3M1 User Manual

AT commands Serial interfacing commands
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
174
Parameter range
0x9D - 0x82D
Default
0x681
AP (API Enable)
Enables the frame-based application programming interface (API) mode.
The API mode setting. The device can format the RF packets it receives into API frames and send
them out the UART. When API is enabled the UART data must be formatted as API frames because
Transparent mode is disabled. See Modes for more information.
Parameter range
0x00 - 0x05
Parameter Description
0x00 API disabled (operate in Transparent mode)
0x01 API enabled
0x02 API enabled (with escaped control characters)
0x03 N/A
0x04 MicroPython REPL
0x05 Bypass mode
Default
0

Digi XBee3 XB3M1 Specifications

General

Brand	Digi
Model	XBee3 XB3M1
Category	Modem
Language	English