Transport Layer Security
(TLS)
Secure the connection between an XBee and Remote Manager with server
authentication
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
156
3. When the device is connected to Remote Manager, the DIcommand can take on any of the
three values shown below, based on the security level of the connection. Verify the that the DI
command is set to 6 to verify that the server was correctly authenticated.
n 0: Connected without TLS
n 5: Connected with TLS but without authentication
n 6: Connected with TLS and with authentication
To Next Page
Loading...
