Get started with Digi Remote Manager Remote Manager reference
Digi XBee3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
98
5. In the toolbar, select More > SMS > Configure. The SMS Configuration dialog appears.
6. Select the SIM 1 option. This should be selected by default.
7. In the Phone Number field, enter the device's SIMcard phone number. You can use the PH
(Phone Number) command to discover the device's phone number.
8. Expand the Advanced Options section.
9. From the Server Number for SIM 1 list box, select the appropriate option:
n If the Remote Manager phone number is a domestic number, select a short code. The
default is 32075-idgp.
n If the Remote Manager phone number is an international number, select a long code.
Note The options in the Server Number for SIM 1 list box are determined within Remote
Manager, and are used to ensure an SMS connection between the device and Remote
Manager. The option selected from the list box must match the Remote Manager phone
number and service ID set for the device. The XBee examines received SMS messages and if
the phone number matches and content contains the correct service ID it will be processed
internally rather than being delivered as user data.
By default, the device is configured with "32075" as the Remote Manger phone number and
"idgp" as the Remote Manager service ID. If you need an alternate short (domestic) code or a
long (international) code, you can re-configure the device using the DP (Remote Manager
Phone Number) and RI (Remote Manager Service ID) commands.
10. Click Save.
11. When all changes are complete, disconnect the device from Remote Manager.
To Next Page
Loading...
Need help?
General
