Chapter 6: 003 Top Panel 43
Insert Switch When enabled (flashing), 003 is in
Channel View. In this view, 003 identifies chan-
nels with any kind of insert assigned to them
(including plug-ins or hardware I/O inserts) by
illuminating their Channel Select switches. The
top row of the LCD shows “Select Insert” and
the Main Counter. The bottom row shows track
names.
Pan/Send Switch When enabled (flashing), 003
is in Channel View. In this view, 003 identifies
channels with sends assigned to them by illumi-
nating their Channel Select switches. The top
row of the LCD shows “Select Pan Send A–E”
and the Main Counter. The bottom row shows
track names.
Page Switches These switches provide access to
additional pages of sends, plug-in parameters or
Memory Locations. The Page switches flash to
indicate a next or previous page is available.
Plug-in Master Bypass Switch This switch lets
you bypass either a single plug-in or all plug-ins
on a channel, depending on the current view.
ESC (Escape/Cancel) Switch When flashing,
this switch acts as a cancel button for certain op-
erations on 003 (such as Channel View selec-
tions) and many on-screen dialogs in Pro Tools.
To Next Page
Loading...
Need help?
General
