DigiDesign 3 User Manual

003 & 003 Rack Getting Started Guide84
Working in Console View
Console View provides a global view of a given
control type across the 003 (such as send A for
the current bank of channels).
003 is in Console View when any of the Console
View switches (Pan, Send, or Insert) is lit in the
Console View section.
 In Console View, the touch-sensitive faders
on 003 mirror the volume faders in Pro Tools.
Fader assignments are shown on-screen in
Pro Tools by blue outlines around the track
names.
 In Console View, the LED rings surrounding
the rotary encoders indicate either the pan posi-
tion, the send level, or the insert control level
for each channel, depending on which Console
View switch is enabled (lit).
There are three Console Views, based on their
corresponding switch name: Pan View, Send
View, and Insert View.
Pan View Workflows
When the Pan switch is enabled (lit), 003 is in
Pan View. This is the default View when you
first open a Pro Tools session. In this view, you
can use the rotary encoders to adjust pan on the
current bank of tracks, select and rename tracks,
and assign inputs or outputs in Assign mode.
To adjust a track’s panning controls:
1 Press the Pan switch to put 003 in Pan View.
2 Do one of the following:
• If the track is a stereo track, toggle the
Meter switch to Left or Right.
– or –
• If the track is a mono track, toggle the
Meter switch to Left.
3 Adjust a channel’s panning by turning its ro-
tary encoder.
Selecting Tracks
To select a track:
1 Press the Pan switch to put 003 in Pan View.
2 Press a Channel Select switch that is unlit to
select the track.
To select a range of tracks:
1 Press the Pan switch to put 003 in Pan View.
2 Press a Channel Select switch that is unlit to
select the track.
When you first open a Pro Tools session,
the top row of the 003 is in Console View
with the Pan switch enabled (lit). This
default view is sometimes called the
Home View.
Pan switch in Console View section
Pan switch
For information on assigning inputs and
outputs in Assign mode, see “Assigning
Pro Tools Paths (Input, Output, Sends,
Inserts)” on page 92.

DigiDesign 3 Specifications

General

Brand	DigiDesign
Model	3
Category	Recording Equipment
Language	English