Chapter 6: 003 Top Panel 41
Console/Channel View Section
The Console and Channel View sections give you control over many on-screen elements in Pro Tools.
Both Console and Channel Views let you view
and access pan, sends, or plug-ins for editing,
and automation.
Console View Switches
Console View switches let you toggle 003 to
show pan position, send assignments, or insert
assignments for all channels on the control sur-
face.
003 is in Console View when any of the Console
View switches (Pan, Send, or Insert) is lit in the
Console View section.
Think of Console View as a global view of a
given control type across the entire mixer con-
sole (such as send A for Channels 1–8).
Insert/Send Position Switches
These switches determine which of the five
available insert positions (marked A–E in
Pro Tools) or ten available send positions
(marked A–J in Pro Tools) are displayed in Con-
sole View.
There are three Console Views, based on their
corresponding switch name:
Pan Switch When enabled (lit), 003 is in Pan
View. This is the default View when you first
open a Pro Tools session.
In this view, rotary encoders adjust channel pan
positions, and faders adjust track volume. The
bottom row of the LCD shows the track names,
and temporarily shows the channel pan posi-
003 Console and Channel View switches
Channel View switches
Insert/Send
Position
Plug-in Page switches
Master Bypass switch
ESC (Escape/Cancel) switch
switches
switches
Console View
When you first open a Pro Tools session, the
top row of the 003 is in Console View with
the Pan switch enabled (lit). This default
view is sometimes called the Home View.
For information on using Console View for
specific Pro Tools workflows, see
Chapter 11, “Pro Tools Mode with 003.”
To Next Page
Loading...
Need help?
General
