DigiDesign D-Command User Manual

Chapter 7: Plug-in Controls 55
Gain/Hold and Threshold Controls
Gain/Hold/Input Control
The top encoder in this section controls the gain (make-up
gain), the hold value for the current plug-in page, or the input
gain for the current plug-in, depending on which indicator is
lit. The Auto indicator under the encoder knob lights when
the displayed parameter is enabled for automation.
Threshold/Output Control
The bottom encoder in this section controls the threshold
value for the current plug-in page, or the output gain for the
current plug-in, depending on which indicator is lit. The Auto
indicator under the encoder knob lights when the displayed
parameter is enabled for automation.
Gain/Hold and Threshold controls in the Dynamics section
Gain/Hold
control
Hold
indicator
Gain
indicator
Threshold
control
Input
indicator
Threshold
indicator
Output
indicator

DigiDesign D-Command Specifications

General

Brand	DigiDesign
Model	D-Command
Category	Recording Equipment
Language	English