DK50018 - Bluetooth accessory and switching decoder Bluetooth connecon
DK50018 - Bluetooth accessory and switching decoder
www.digikeijs.com
*R-Bus, B-Bus are registered trademarks of Modelleisenbhan GmbH. XpressNet and RS-Bus are registered trademarks of Lenz 24www.digikeijs.com
4.1.3 Z21 App — POM programming
*
In the following example we will program the DK50018
to use preset 2 using CV47— Value 2
1. Connect the DK50018 to the output of the z/Z21
main channel.
2. Open CV programming —> Manual —> POM in
the Z21 App.
3. Press the programming buon on the DK50018.
The Yellow LED will be lit
4. On the Z21 app, set the Loco address to 9999 and
change CV address to 47 and CV value to 2.
5. Hit the Set CV buon and your change will be
wrien to the DK50018
6. Press the program buon on the DK50018 buon,
the yellow led on the DK50018 should go o which
means that the DK50018 has closed programming
mode and now has preset 2 as acve preset.
*:POM stands for Program On the Main and corresponds to the direct programming on the track or "track output" of the control unit.
To Next Page
Loading...
Need help?
General
