Digital Equipment DECserver 700-08 - Electrical Requirements

2–3Checking the Site
2.3 Electrical Requirements
The power at the electrical outlet must match the requirements shown in Table 2–4.
The instructions assume that an appropriate AC power source is within 1.8 m (6.0 ft)
of the DECserver 700.
Table 2–4: Electrical Requirements
Parameter
DECserver 700
Line voltage
1
100 – 120 V rms/220 – 240 V rms
Frequency 50/60 Hz
Line current 1.4 A rms/.75 A rms
Power
92 W
1
The DECserver 700 automatically selects the voltage range.
Table 2–5 shows the electrical output from the standard Ethernet/IEEE 802.3
connector.
Table 2–5: Standard Ethernet/IEEE 802.3 Connector Output
Parameter
DECserver 700
Voltage + 12 V DC
Current .5 A Max