Digital Equipment DECserver 700-08 - Installing the Ethernet Cables and Devices; Installing the Standard Ethernet Cables and Devices

3–2 Site Preparation and Maintenance
• One terminal (asynchronous, DEC423 or EIA-232-D compatible) is available
for hardware testing and system verification.
3.2 Installing the Ethernet Cables and Devices
You can connect the DECserver 700 to:
• Standard Ethernet/IEEE 802.3 network
• 10BaseT Ethernet/IEEE 802.3 network
• ThinWire Ethernet/IEEE 802.3 network using an external media access unit
(MAU) such as a DESTA
TM
3.2.1 Installing the Standard Ethernet Cables and Devices
You can connect the DECserver 700 to the standard Ethernet/IEEE 802.3 network
(Figure 3–1) by connecting to:
• Another transceiver cable section. (You connect to another section by using a
Etherjack Junction Box.)
• A DELNI local area network.
• A transceiver on a standard Ethernet coaxial cable for Digital Equipment
Corporation baseband networks.