Digital Equipment DECserver 700-08 - Page 6

iv
Cabling the Site
3.1 Preinstallation Checks 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Installing the Ethernet Cables and Devices 3–2. . . . . . . . . . . . . . . .
3.2.1 Installing the Standard Ethernet Cables and Devices 3–2. . . . . .
3.2.2 Installing the 10BaseT Ethernet Cables and Devices 3–4. . . . . .
3.2.3 Installing the ThinWire Ethernet Cables and Devices 3–5. . . . . .
3.3 Installing Serial Cables and Devices on the DECserver 700-16 3–9
3.4 Installing Serial Cables and Devices on the DECserver 700-08 3–11
3.5 Cabling Requirements 3–12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.1 Standard Ethernet Connection 3–13. . . . . . . . . . . . . . . . . . . . . . . .
3.5.2 10BaseT Ethernet Connection 3–14. . . . . . . . . . . . . . . . . . . . . . . .
3.5.3 ThinWire Ethernet Connection 3–14. . . . . . . . . . . . . . . . . . . . . . .
3.6 Installing the DECserver 700 in a Rack 3–15. . . . . . . . . . . . . . . . . . .
Connector and Cable Pin Descriptions
4.1 Connector Pin Descriptions 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.1 Standard Ethernet 4–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.2 10BaseT Ethernet 4–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.3 DECserver 700-08 Serial Line Ports 4–4. . . . . . . . . . . . . . . . . . .
4.1.4 DECserver 700-16 Serial Line Ports 4–5. . . . . . . . . . . . . . . . . . .
4.2 Cable Connections 4–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing and Adding Memory
5.1 Replacing a Faulty Single-In-Line Memory Module 5–1. . . . . . . . .
5.2 Additional Memory Supported 5–2. . . . . . . . . . . . . . . . . . . . . . . . .
5.3 Installing Extra Memory 5–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing and Adding Flash RAM
6.1 Replacing or Adding Flash RAM 6–1. . . . . . . . . . . . . . . . . . . . . . .