DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E
2
COPYRIGHT
1999- 2004 BY DIGITAL-LOGIC AG
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, in any
form or by any means, electronic, mechanical, optical, manual, or otherwise, without the prior written permis-
sion of DIGITAL-LOGIC AG.
The software described herein, together with this document, are furnished under a license agreement and
may be used or copied only in accordance with the terms of that agreement.
ATTENTION:
All information in this manual and about the product are subject to change without prior notice.
REVISION HISTORY:
Prod.-Serialnumber:
From: To:
Product
V1.1 None 0.01 05.2000 FK Initial version, Development
V2.1 V1.20 V1.2 06.2001 STP Serial product
V2.1 V1.21 V1.3 08.2001 STP Remote, COM’s, jumper, memory
map, etc
V2.1 V1.21 V1.4 09.2001 STP Thermopicture, etc
V2.2 V1.23 V1.4 10.2001 KUF Current, Boottime, BAT-Lifetime
V2.3 V1.26 V1.5 08.2003 KUF
IrDA, Eratas
Kap 5.6.2. J58 always on 1-2
p76 contrast control removed
Kap 8.1. remark for J49/50 position of V2.1
Kap 11.1.3. remoteenabler DSUB-pins
J54 deleted in Kap 7.
V2.4 1.26 1.5A 01.2004 DAR RS485/422 description added
V2.4 1.26 1.5B 04.2004 DAR Int15 / minor corrections
V2.5 1.26 1.5C 08.2004 DAR Bios history corrected, minor correc-
tions
V2.5 1.26 1.5D 08.2004 DAR Bios download, front picture
V2.5 1.26 1.5E 11.2004 DAR LAN interface, RS485
ATTENTION
1. All information in this manual and the product are subject to change without prior notice.
2. Read this manual prior installation of the product.
3. Read the security information carefully prior installtion of the product.
Registration:
http://www.digitallogic.com -> SUPPORT -> embedded products -> register
After registration, you will receive driver & software updates, errata information, customer information and
news from DIGITAL-LOGIC AG products automatically.
To Next Page
Loading...