DIGITAL-LOGIC Microspace MSM586SEN - Driver Installation WINDOWS 95; Driver Installation WINDOWS 98 SE; EEPROM Update

DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E
102
13.1.2 Driver installation WINDOWS 95
- Copy Intel Pro100+ driver on HD (x:\drivers\network\intel\82559ER).
- De-install all networkdrivers under Windows95 in system and software folders and restart Windows.
Networkcard Pro10 PCI will be auto-detected and all drivers can be installed (of the copied directory).
13.1.3 Driver installation WINDOWS 98SE
- Update the driver from the Intel® PRO/10+PCI device in the device manager.
- Choose the option “select list with drivers”.
- Choose the “Intel 8255xx based Ethernet PCI Adapter(10/100)” .
- Go on. If you get a failure report, press ok. If the PC hangs switch off / on the power.
- After reboot you must activate the Intel 8255xx driver in the device manager.
13.1.4 EEPROM update
Do not use this function, if the EEPROM is not corrupted !
To download the datas in the EEPROM, make the following steps:
- copy the folder << x:\drivers\network\intel\82559er\eeupdate >> to a floppy disk.
- start MSDOS
- type the following string:
a:\eeupdate -all -device=1209 generic.eep generic.dat
Now the EEPROM is updated again.