EasyManua.ls Logo

DIGITAL-LOGIC Microspace MSM586SEN - VGA BIOS Download Function

DIGITAL-LOGIC Microspace MSM586SEN
348 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DIGITAL-LOGIC AG MSM586SEN/SEV Manual V1.5E
48
5.6.2 VGA BIOS download function
The BIOS for the VGA must be downloaded, before a LCD is connected. This could be also a new LCD- dis-
play, which needs a corresponding VGA- BIOS.
-
Select the SHADOW option in the BIOS, for a BIOS and VGA (if this option is available).
-
Disable the EMM386 or other memory managers in the CONFIG.SYS of your bootdisk.
-
Make sure, that the FLASH520.EXE programm and the BIOS to download are on the
same path and directory!
-
Boot the DOS without config.sys & autoexec.bat -> press “F5” while starting DOS boot.
-
Is the empty diskspace, where the download tool is located, larger than 64kB (for safe storage)
-
Is the floppydisk not write-protected
Start the DOWNLOADING process:
1. Start the system with the bootable diskette. If you do not have a bootable diskette or floppy drive,
you may can start in DOS mode by pressing the F5 key to disable the autoexec.bat and config.sys.
2. Run Flash520 -V lcd_file.000
3. If the bios download is finished you have to power off the system
4. Now the download procedure is finished
If the download does not work:
-
Check, if no EMM386 is loaded.
-
Check, if no peripheral card is in the system, which occupies the same memory range. Disconnect this
card.
-
If the download is stopped or not completed, make only a warm boot and repeat the steps or download
another file. As the video is may shadowed, everything is visible and a cold boot would clear the screen
and nothing would be visible afterwards.
If the screen flickers or is misaligned after reboot:
-
The previously loaded VGA- BIOS is not corresponding 100% or works only on the LCD properly.
If the screen is dark after the reboot of the system:
-
A new system BIOS must be programmed. Ask DIGITAL-LOGIC AG for the binary file.
If the previous version is still programmed:
-
Switch off the board and do not make a warm boot due to the fact that the data may are still stored in the
memory shadow.
-
Product: BIOS-Core download VGA-BIOS download BIOS-Ext. download
File-Extension: *.COR *.V40 , *.V45 *.V48
depending on the product
*.BIN
BIOS Size: 128k 32k 32k
Addressrange: E0000 - FFFFFh C0000 – C7FFFh C8000 - CFFFFh
MSM586SEN / SEV / SL flash520.exe flash520.exe -

Table of Contents