Digital Projection E-Vision Series - Page 23

DLP Projector—User’s Manual
4.
If more than one input device is
connected, press the SOURCE
button and use ▲▼ to scroll among
devices.
 DVI: Digital Visual Interface
 HDMI: High-Definition Multimedia Interface
compatible
 DisplayPort: Digital display interface
 VGA 1 / 2: Analog RGB 1 / 2
 BNC: Analog RGB (BNC connector)

Component Video: DVD input YCbCr / YPbPr , or
HDTV input YPbPr
 S-Video: Super video (Y/C separated)
 Composite Video: Traditional composite video
5.
When the “Power Off? /Press
Power again” message appears,
press the POWER button. The
projector turns off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the READY LED stops flashing–indicating the projector
has cooled down.
— 14 —