Digital Projection E-Vision Series User Manual

DLP Projector—User’s Manual
— 22 —
ON-SCREEN DISPLAY (OSD) MENU SETTINGS
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control cursor buttons or the buttons on the top of the projector to
navigate and make changes to the OSD. The following illustration shows the corresponding
buttons on the projector.
13
1
6
5
2
7
2
4
1
1
3
4
5
6
7
1. To enter the OSD, press the MENU
button.
2. There are three menus. Press the cursor
◄► button to move through the menus.
3. Press the cursor ▲▼ button to move up
and don in a menu.
4. Press ◄► to change values for settings.
5. Press MENU to close the OSD or leave
a submenu.
Note:
Depending on the video source, not all items in the OSD are available. For example, the
Horizontal/Vertical Position items in the Computer menu can only be modified when
connected to a PC. Items that are not available cannot be accessed and are grayed out.

Digital Projection E-Vision Series Specifications

General

Dimensions	Varies by model
Technology	DLP
Light Source	Laser
Light Source Life	Up to 30, 000 hours (laser)
Throw Ratio	Varies by model
Projection Size	Varies depending on lens and distance
Input Lag	Varies by model
Color Gamut	Varies by model, typically Rec.709
HDR Support	Yes
3D Support	Yes
Lens Shift	Vertical and Horizontal
Keystone Correction	Yes
Inputs	HDMI, DisplayPort, DVI, VGA
Weight	Varies by model (typically 20-50 lbs)
Power Consumption	Varies by model (typically 300-500W)