Digital Projection E-Vision Series User Manual

DLP Projector—User’s Manual
— 50 —
MAINTENANCE AND SECURITY
Tilt Up/Down caution
 When projector detect angle is over spec, popup caution message.
The model with Standard lamp module
The model with Standard lamp module can be used projection angle as shown below.
If Projector projection angle exceeds the drawing shown and don’t use tilt lamp module. Showing caution
message for 5sec and then disappear, projector remain on. (every time when projector on
; This function
can be disable see
Advanced 1 Feature on page 36 )
15
15
Standard Lamp
The model with Tilt lamp module
The model with Tilt lamp module can be used projection angle as shown below.
If Projector projection angle exceeds the drawing shown and don’t use standard lamp module. Showing
caution message for 5sec and then disappear, projector remain on. (every time when projector on
; This
function can be disable see
Advanced 1 Feature on page 36 )
Tilt Lamp
15
15
Warning:
Your operation might cause lamp defect and life decay. If used incorrect lamp module

Digital Projection E-Vision Series Specifications

General

Dimensions	Varies by model
Technology	DLP
Light Source	Laser
Light Source Life	Up to 30, 000 hours (laser)
Throw Ratio	Varies by model
Projection Size	Varies depending on lens and distance
Input Lag	Varies by model
Color Gamut	Varies by model, typically Rec.709
HDR Support	Yes
3D Support	Yes
Lens Shift	Vertical and Horizontal
Keystone Correction	Yes
Inputs	HDMI, DisplayPort, DVI, VGA
Weight	Varies by model (typically 20-50 lbs)
Power Consumption	Varies by model (typically 300-500W)