Digital Projection E-Vision Series User Manual

DLP Projector—User’s Manual
Cleaning the filter (filter: optional parts)
The air filter prevents dust from accumulating on the surface of the optical elements inside the
projector. If the filter is dirty or clogged, your projector may overheat or degrading the projected
image quality.
1.
Turn off the projector, and
unplug the AC power cord
from the AC outlet.
2.
Cleaning the filter with a
vacuum cleaner.
Caution:
Recommend avoiding dusty or smoky environments when you operate the projector, it may
cause poor image quality.
If the filter is heavily clogged and unable to clean, replace a new filter.
Note:
Using a ladder is recommended to access the filter. Do not remove the projector from the
wall mount.
— 56 —

Digital Projection E-Vision Series Specifications

General

Dimensions	Varies by model
Technology	DLP
Light Source	Laser
Light Source Life	Up to 30, 000 hours (laser)
Throw Ratio	Varies by model
Projection Size	Varies depending on lens and distance
Input Lag	Varies by model
Color Gamut	Varies by model, typically Rec.709
HDR Support	Yes
3D Support	Yes
Lens Shift	Vertical and Horizontal
Keystone Correction	Yes
Inputs	HDMI, DisplayPort, DVI, VGA
Weight	Varies by model (typically 20-50 lbs)
Power Consumption	Varies by model (typically 300-500W)