DigiTech GNX4 User Manual

Using the UNDO Footswitch to Erase a Track
You can undo the last take or previous tracks using the GNX4’s footswitches. To undo tracks,follow
these steps:
1.Press and hold the STOP/UNDO footswitch. The GNX4’s display reads
undo,indicating the last
recorded track(s) are being deleted.
Using the GNXFC for Hands-Free Computer Recording
Functions
The GNX4 is equipped with a footswitch jack that lets you connect an optional GNXFC for controlling the
GNX4’s recorder. This 3-button footswitch features functions for STOP/UNDO, RECORD,and PLAY.
The GNXFC is an ideal companion for recording as it lets you leave your GNX4 footswitches setup for
changing presets and switching amp channels while the GNXFC is used specifically for controlling the Pro
Tracks Plus recording software. Use only a TRS stereo 1/4” cable when connecting the GNXFC to the
GNX4.
The GNXFC functions are exactly the same as the GNX4 footswitches when it is in Recording mode. Refer
to the previous section Using the GNX4’s Footswitches for Hands-free Computer Recording for
operating instructions.
96
Computer Recording via USB

DigiTech GNX4 Specifications

General

USB	Yes
Expression Pedal	Built-in
Display	LCD
Type	Multi-Effects Processor
Looper	Yes
Inputs	1 x XLR
Outputs	2 x 1/4"
MIDI	In/Out
Power Supply	9V DC adapter
Storage	CompactFlash card slot