Pre-Roll
Pre-Roll is an amount of time you can have the recorder count off before it actually begins recording.
Pre-Roll can also be used as a count in cue, indicating when the very beginning of the song starts. The
GNX4’s Pre-Roll has five settings Off, 3, 4, 8,or 16 counts. To setup the Pre-Roll function,follow these
steps:
Begin with the recorder stopped.
1.Press the SONG SETUP button until the GNX4’s main display reads
pre-roll.
2.Use the DATA WHEEL to select the amount of Pre Roll or turn it off. You can select from 3,4,8,or
16 counts before recording begins.
3.When finished, press EXIT.
Song Repeat
To rehearse with the song you just created, Song Repeat continuously plays the song without having to
press the REWIND and PLAY buttons to re-start it. Each time the song ends during playback,it
automatically restarts from the beginning when this feature is turned on. To enable Song Repeat, follow
these steps:
Begin with the recorder stopped.
1.Press the SONG SETUP button until the GNX4’s main display reads song rpt.
2.Use the DATA WHEEL to turn Song Repeat on and off.
3.When finished, press EXIT.
1. Press the Song
2. Use the Data Wheel to
3. When finished
1. Press the Song
2. Use the Data Wheel to
3. When finished
To Next Page
Loading...
Need help?
General
