DigiTech GNX4 User Manual

Parameter 3 - Knob 4 selects the Phaser sweep starting point (LFO STrt). Ranges from 0
(bottom of the sweep point) to 99 (top of the sweep point).
Mod Mix - Knob 5 controls the mix (
mod mix) of wet and dry signal. Ranges from 0 (all dry) to 99
(all wet).
Tremolo
A Tremolo effect modulates the volume of the signal at an even rate.
Parameter 1 - Knob 2 adjusts the rate (
Speed) at which the volume modulates. Ranges from 0 to
99.
Parameter 2 - Knob 3 adjusts the intensity (
Depth) of the modulating volume. Ranges from 0 to
99.
Parameter 3 - Knob 4 selects the type of wave form the modulation uses. Choices include:
Triangle ,Sine,and Square.
Knob 5 has no function when the Tremolo is selected.
Panner
An Auto Panner modulates the sound from left to right at an even rate.
Parameter 1 - Knob 2 adjusts the rate (
Speed) at which the signal pans from side to side. Ranges
from
0 to 99.
Parameter 2 - Knob 3 adjusts the intensity (
Depth) of the changing pan. Ranges from 0 to 99.
Parameter 3 - Knob 4 selects the type of wave form the modulation uses. Choices include:
Triangle ,Sine,and Square.
Knob 5 has no function when the Panner is selected.
Vibrato
A Vibrato effect modulates the pitch of the incoming signal at an even rate.
Parameter 1 - Knob 2 adjusts the rate (
Speed) at which the pitch modulates. Ranges from 0 to
99.
Parameter 2 - Knob 3 adjusts the intensity (
Depth) of the modulating pitch. Ranges from 0 to 99.
Parameter 3 - Knob 4 selects the type of wave form the modulation uses. Choices include:
Triangle ,Sine,and Square.
Knob 5 does not function when the Vibrato is selected.
Rotary Speaker
Rotary Speaker is an emulation of a device that includes a spinning horn and rotor (woofer). The
rotation of these two speakers produces an interesting combination of sound panning from side to
side, as well as a slight pitch change due to the speed of the sound coming towards,and then going
away from the listener.
Parameter 1 - Knob 2 adjusts the rate (
Speed) of the spinning speakers. Ranges from 0 to 99.
Parameter 2 - Knob 3 controls the intensity (
Depth) of the Effect. Ranges from 0 to 99.
Parameter 3 - Knob 4 controls the Pitch Shift (
doppler) effect that is the ratio between the horn
and the rotor positions. Ranges from
0 to 99.
*Parameter 4 - Selects the crossover frequency between the horn and rotor. Ranges from 200Hz
to 1500Hz.
Mod Mix - Knob 5 controls the mix (
mod mix) of wet and dry signal. Ranges from 0 (all dry) to
99 (all wet).
*These Parameters are only available using the X-E
DIT
™
Editor/Librarian software.
41
Effects and Parameters

DigiTech GNX4 Specifications

General

USB	Yes
Expression Pedal	Built-in
Display	LCD
Type	Multi-Effects Processor
Looper	Yes
Inputs	1 x XLR
Outputs	2 x 1/4"
MIDI	In/Out
Power Supply	9V DC adapter
Storage	CompactFlash card slot