Here is an example of how the CHAN ONE EQ row would function when the button is pressed:
Warped Amp Sound being heard:
If the sound being heard is a Warped sound of both amp models, pressing the CHAN ONE EQ button
selects the knobs to control the CHAN ONE EQ’s row of parameters. The STATUS button LED will
light yellow,indicating a Warped sound is being heard,and the knobs will all light green. You can modify
the CHAN ONE EQ row parameters which will be heard as the knobs are turned. The STATUS
button will turn the CHAN ONE EQ on or off and indicate this status by turning the button LED on
and off.
CHAN ONE amp sound being heard:
If the sound being heard is the CHAN ONE amp tone,pressing the CHAN ONE EQ button selects
the knobs to control CHAN ONE EQ’s row of parameters. The STATUS button and the knobs will
light green. You can modify the CHAN ONE EQ row parameters,which can be heard as the knobs are
turned. The STATUS button will turn the CHAN ONE EQ on or off and indicate this status by
turning the button LED on and off.
CHAN TWO amp sound being heard:
If the sound being heard is the CHAN TWO amp tone, pressing the CHAN ONE EQ button selects
the knobs to control the CHAN ONE EQ’s row of parameters. The STATUS button will be lit red
indicating you are still listening to the CHAN TWO amp tone. The knobs however will be lit green and
once any of them are turned, the sound will change from the CHAN TWO amp tone to the CHAN
ONE amp tone. You can then modify the CHAN ONE EQ parameters and these changes can be
heard as the knobs are turned. The STATUS button will also turn green at this time and can be used
to turn the CHAN ONE EQ on or off as will be indicated by the button’s LED turning on and off.
28
GNX4 Matrix Functions
To Next Page
Loading...
Need help?
General
