DigiTech JAMMAN - Page 12

6
4. Start Loop Playback
Press the REC/PLAY/OVERDUB footswitch while recording to set the loop point
and start playing back from the beginning. The REC/PLAY/OVERDUB footswitch and
PLAY LEDs light green. Adjust the LOOP LEVEL and RHYTHM LEVEL knobs as needed.
99
During playback, the
RECORD and REC/PLAY/OVERDUB
LEDs light solid green.
Press the REC/PLAY/OVERDUB
footswitch while recording to stop
recording and start playback.
Adjust the LOOP LEVEL
and RHYTHM LEVEL knobs
as necessary .
Quick Start - Looper