DigiTech JAMMAN User Manual

62
Erase All Loops - Internal Memory
The JamMan
®
Delay uses both internal memory and optional external
memory for the storage of loop files. You can delete all loops from internal
memory or from external memory without having to delete them one at a
time.
To delete all loops from internal memory, follow these steps:
Select a loop memory location that does not light the 1. CARD MEM LED.
Press and hold the 2. LOOP STORE button for four seconds until Ei
(Erase Internal Memory Loops) appears in the Display and release
(EL will show briefly first but keep holding the button). The LOOP
STORE
button will now be flashing.
Press the 3. LOOP STORE button again. The DISPLAY will now read E?
(Erase Loops?) and the button will continue to flash. To abort this
procedure, press the LOOP UP or LOOP DOWN footswitch at any time.
To erase all loop data, press and hold the 4. LOOP STORE button again for
two more seconds. The DISPLAY will show BU indicating the card is
being erased.

DigiTech JAMMAN Specifications

General

Technology	Digital
MIDI	No
Type	Looper
Memory	Internal memory for loop storage
Power Supply	9V DC
Outputs	1 x 1/4" Mono