2
Before powering up your JamMan
®
Delay:
1. Make Connections
Connect a guitar or bass to the 1. LEFT (Mono) IN jack on the JamMan
Delay’s rear panel.
Connect the JamMan Delay’s 2. LEFT (Mono) OUT to the input of an
amplifier.
2. Connect the Power Supply
Start with your amplifier and the JamMan turned off.1.
Turn the 2. LOOP LEVEL and RHYTHM LEVEL knobs all the way down on
the JamMan Delay.
Connect the PS-0913B power supply to the 3. POWER jack on the
JamMan Delay.
Connect the other end of the PS-0913B power supply to an AC outlet.4.
Turn your amplifier on and turn up its volume to a normal playing 5.
level.
Quick Start - Connections
To Next Page
Need help?
General
