Loop Phrases can be stopped in three ways after the TEMPO/STOP footswitch
is pressed:
• Stop ( St ): Stops the phrase immediately when Stop is pressed.
• Finish ( Fi ): Finishes playing to the end of the phrase and stops after Stop is
pressed.
• Fade ( FA ): Fades the phrase volume to 0 and then stops after Stop is
pressed.
To change Stop Modes, follow these steps:
Press the 1. SETUP button until the STOP MODE LED is lit.
Press the up or down 2. LOOP SELECT buttons to select the Stop Mode
you want to use. The Stop Mode names appear in the DISPLAY.
Press the 3. LOOP STORE button twice to store the changes, if desired.
NOTE: Stop modes must be stored with each phrase individually.
To Next Page
Loading...
