16
than 16 seconds, the delay time will divide in half as needed to match
the loop length.
Repeats Knob18.
The Repeats knob controls the number of delay repeats. Turn this knob
clockwise to increase the number of repeats, and counter-clockwise
to decrease the number of repeats. Turning this knob to the maximum
position engages repeat-hold in some of the delay types (see page 27).
Modify 1 Knob19.
This knob controls a delay type specific parameter. See page 27 for
more information.
Modify 2 Knob20.
This knob controls a delay type specific parameter. See page 27 for
more information.
Type Knob21.
The Type knob selects from a variety of delay types and delay time ranges.
See page 26 for a list of delay types.
Delay Store Button22.
This button is used to store delay settings to one of the 3 numbered
footswitches for instant recall.
Dry Off Button23.
This button mutes the dry signal path through the JamMan
®
Delay.
Enable this button when running the JamMan Delay in a parallel effects
loop where dry signal is already present. Press and hold this button for
2 seconds to enable or disable this feature.
Guided Tour - Front Panel
To Next Page
Loading...
Need help?
General
