DigiTech JAMMAN User Manual

19
Right Output5.
Connect this output to the input of a second guitar amplifier when a
second amp is being used.
Expression Input6.
Connect a mono (tip/sleeve) passive expression pedal to this input to
morph between two different delay settings or to control the output level
of loop playback. Passive volume pedals with a 25k to 250k Ohm range
work best. NOTE: TRS style expression pedals are not supported.
Expression Assign Switch7.
This switch changes whether a connected expression pedal controls the
delay parameters or the looper’s playback level.
Footswitch Jack8.
This jack is for connecting an optional 3-button FS3X footswitch for
remote selection of Undo/Redo, Loop Reverse, and Loop Tempo.
SD/SDHC Card Slot9.
The JamMan
®
Delay is compatible with optional SD/SDHC memory
cards up to 32GB in size for expanding the total amount of loop storage
time available. Adding an SD card also increases the number of available
loops from 99 to 198. New cards should be formatted in the JamMan
Delay before use. The JamMan Delay comes equipped with 35 minutes
of internal loop storage.
USB Jack10.
The mini USB jack provides a connection to a Windows or Mac
computer for transferring loop files to and from the JamMan Delay via
the downloadable JamManager Loop Librarian.
Power Jack11.
Connect the included PS-0913B AC power supply here. The JamMan
Delay can only be powered by using the external adapter.
Guided Tour - Rear Panel

DigiTech JAMMAN Specifications

General

Technology	Digital
MIDI	No
Type	Looper
Memory	Internal memory for loop storage
Power Supply	9V DC
Outputs	1 x 1/4" Mono