English
82
8. Initializing/partitioning and formatting with Linux
It is possible to partition the DIGITTRADE HS256 S3 in more than one partition using
Linux. For this the correct file system has to be initialized first.
The process which is described here based on YaST from Suse Linux. The process is
similar on other Linux distributions.
- Start running the DIGITTRADE HS256 S3 (see page 63 and 65).
Then open YaST. If necessary, you will need to authenticate yourself.
- Choose from the left side “System” and from the right field “Partitioner”.
- For security reasons a window will open and you will be asked whether you are
familiar with the partitioning. Confirm this with “Yes”.
- The volume table of your system will appear.